Configuring Basic Functions Of Mld Snooping - 3Com Switch 4800G 24-Port Configuration Manual

584 C 43: MLD S
HAPTER
Configuring Basic
Functions of MLD
Snooping
Configuration
Prerequisites
Enabling MLD Snooping
C
NOOPING ONFIGURATION
Task
"Configuring an MLD Snooping Policy" on
page 591
n
Configurations made in MLD Snooping view are effective for all VLANs, while
■
configurations made in VLAN view are effective only for ports belonging to the
current VLAN. For a given VLAN, a configuration made in MLD Snooping view
is effective only if the same configuration is not made in VLAN view.
Configurations made in MLD Snooping view are effective for all ports;
■
configurations made in Ethernet port view are effective only for the current
port; configurations made in manual port group view are effective only for all
the ports in the current port group; configurations made in aggregation group
view are effective only for the master port. For a given port, a configuration
made in MLD Snooping view is effective only if the same configuration is not
made in Ethernet port view or port group view.
Before configuring the basic functions of MLD Snooping, complete the following
tasks:
Configure the corresponding VLANs
■
Before configuring the basic functions of MLD Snooping, prepare the following
data:
The version of MLD Snooping
■
Follow these steps to enable MLD Snooping:
To do...
Enter system view
Enable MLD Snooping
globally and enter
MLD-Snooping view
Return to system view
"Configuring an IPv6 Multicast
Group Filter" on page 591
"Configuring IPv6 Multicast
Source Port Filtering" on page
592
"Configuring Dropping Unknown
IPv6 Multicast Data" on page 593
"Configuring MLD Report
Suppression" on page 593
"Configuring Maximum Multicast
Groups that that Can Be Joined
on a Port" on page 594
"Configuring IPv6 Multicast
Group Replacement" on page
594
Use the command...
system-view
mld-snooping
quit
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Remarks
-
Required
Disabled by default
-