Ipv6 Basics Configuration Task List; Configuring Basic Ipv6 Functions - 3Com Switch 4800G 24-Port Configuration Manual

Switch 4800g family 24-port, pwr 24-port, 48-port, pwr 48-port, 24-port sfp
Hide thumbs Also See for Switch 4800G 24-Port:
Table of Contents

Advertisement

508
C
38: IP
6 B
HAPTER
V
Protocols and Standards
IPv6 Basics
Configuration Task
List
Configuring Basic IPv6
Functions
Enabling the IPv6 Packet
Forwarding Function
Configuring an IPv6
Unicast Address
C
ASICS
ONFIGURATION
Protocols and standards related to IPv6 include:
RFC 1881: IPv6 Address Allocation Management
RFC 1887: An Architecture for IPv6 Unicast Address Allocation
RFC 1981: Path MTU Discovery for IP version 6
RFC 2375: IPv6 Multicast Address Assignments
RFC 2460: Internet Protocol, Version 6 (IPv6) Specification.
RFC 2461: Neighbor Discovery for IP Version 6 (IPv6)
RFC 2462: IPv6 Stateless Address Autoconfiguration
RFC 2463: Internet Control Message Protocol (ICMPv6) for the Internet
Protocol Version 6 (IPv6) Specification
RFC 2464: Transmission of IPv6 Packets over Ethernet Networks
RFC 2526: Reserved IPv6 Subnet Anycast Addresses
RFC 3307: Allocation Guidelines for IPv6 Multicast Addresses
RFC 3513: Internet Protocol Version 6 (IPv6) Addressing Architecture
RFC 3596: DNS Extensions to Support IP Version 6
Complete the following tasks to perform IPv6 basics configuration:
Task
"Configuring Basic IPv6 Functions" on page 508
"Configuring IPv6 NDP" on page 510
"Configuring PMTU Discovery" on page 513
"Configuring IPv6 TCP Properties" on page 514
"Configuring ICMPv6 Packet Sending" on page 514
"Configuring IPv6 DNS" on page 515
Before IPv6-related configurations, you must enable the IPv6 packet forwarding
function. Otherwise, an interface cannot forward IPv6 packets even if an IPv6
address is configured, resulting in communication failures in the IPv6 network.
Follow these steps to enable the IPv6 packet forwarding function:
To do...
Enter system view
Enable the IPv6 packet
forwarding function
IPv6 site-local addresses and aggregatable global unicast addresses can be
configured in the following ways:
Use the command...
system-view
ipv6
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Remarks
-
Required
Disabled by default.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents