3Com Switch 4800G 24-Port Configuration Manual page 1120

1120 C 88: SSH C
HAPTER ONFIGURATION
# Create local user client001, and set the user command privilege level to 3
[Switch] local-user client001
[Switch-luser-client001] password simple aabbcc
[Switch-luser-client001] service-type ssh level 3
[Switch-luser-client001] quit
# Specify the service type for user client001 as Stelnet, and the authentication
method as password.
[Switch] ssh user client001 service-type stelnet authentication-type password
Configure the SSH client
n
There are a variety of SSH client software, such as PuTTY, OpenSSH, and so on.
The following is an example of configuring SSH client using PuTT v0.58.
# Establish a connection with the SSH server
Launch PuTTY.exe to enter the following interface. In the Host Name (or IP
address) text box, enter the IP address of the server (192.168.1.40).
Figure 332 SSH client configuration interface
From the window shown in Figure 332, click Open. The following SSH client
interface appears. If the connection is normal, you will be prompted to enter the
username (client001) and password (aabbcc)