Troubleshooting Routing Policy Configuration - 3Com Switch 4800G 24-Port Configuration Manual

Switch 4800g family 24-port, pwr 24-port, 48-port, pwr 48-port, 24-port sfp

Hide thumbs Also See for Switch 4800G 24-Port:

Product manual (13 pages)

Datasheet (8 pages)

Configuration manual (27 pages)

Table of Contents

Troubleshooting

Routing Policy

Configuration

IPv4 Routing

Information Filtering

6 Apply the routing policy to route redistribution.

# Configure Switch B: apply the routing policy when redistributing routes.

[SwitchB] ospf

[SwitchB-ospf-1] import-route isis 1 route-policy isis2ospf

[SwitchB-ospf-1] quit

# Display the OSPF routing table on Switch A. You can find the cost of route

172.17.1.0/24 is 100, tag of route 172.17.1.0/24 is 20, and other external routes

have no change.

[SwitchA] display ospf routing

OSPF Process 1 with Router ID 192.168.1.1

Routing for Network

192.168.1.0/24

Routing for ASEs

172.17.1.0/24

172.17.2.0/24

172.17.3.0/24

192.168.2.0/24

Total Nets: 5

Intra Area: 1

Inter Area: 0

Filtering routing information failed, while routing protocol runs normally.

At least one item of the IP prefix list should be configured as permit mode, and at

least one node in the Route-policy should be configured as permit mode.

Processing procedure

1 Use the display ip ip-prefix command to display IP prefix list information.

2 Use the display route-policy command to display routing policy information.