Configuring Ospf Graceful Restart - 3Com Switch 4800G 24-Port Configuration Manual

306 C 28: OSPF C
HAPTER
Enabling the
Advertisement and
Reception of Opaque
LSAs
Configuring OSPF
Graceful Restart
Configuring the GR
Capability
ONFIGURATION
To do...
Enter system view
Bind OSPF MIB to an
OSPF process
Enable OSPF trap
Enter OSPF view
Enable messages
logging
With this feature enabled, the OSPF router can receive and advertise Type 9, Type
10 and Type 11 opaque LSAs.
Follow these steps to enable the advertisement and reception of opaque LSAs:
To do...
Enter system view
Enter OSPF view
Enable the advertisement and
reception of opaque LSAs
You can configure the IETF standard or non IETF standard OSPF Graceful Restart
capability.
Configuring the IETF standard OSPF GR capability
Follow these steps to configure the standard IETF OSPF GR capability:
To do...
Enter system view
Enter OSPF view
Enable the advertisement and
reception of opaque LSAs
Use the command...
system-view
ospf mib-binding process-id
snmp-agent trap enable ospf
[ process-id ] [ ifauthfail |
ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit |
lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifcfgerror | virifauthfail |
virifrxbadpkt | virifstatechange |
viriftxretransmit |
virnbrstatechange ] *
ospf [ process-id | router-id
router-id ] *
enable log [ config | error | state ] Optional
Use the command...
system-view
ospf [ process-id | router-id
router-id ] *
opaque-capability enable
Use the command...
system-view
ospf [ process-id | router-id
router-id ] *
opaque-capability enable
Remarks
-
Optional
The first OSPF process is
bound with OSPF MIB by
default.
Optional
Enabled by default
-
Not enabled by default
Remarks
-
-
Optional
Disabled by default
Remarks
-
-
Required
Disabled by default