Sftp Configuration Example - 3Com Switch 4800G 24-Port Configuration Manual

Displaying Help
Information
Terminating the
Connection to the
Remote SFTP Server
SFTP Configuration
Example
To do...
Delete a file from the SFTP
server
This configuration task is to display a list of all commands or the help information
of an SFTP client command, such as the command format and parameters.
Follow these steps to display a list of all commands or the help information of an
SFTP client command:
To do...
Establish a connection to the
remote SFTP server and enter
SFTP client view
Display a list of all commands
or the help information of an
SFTP client command
Follow these steps to terminate the connection to the remote SFTP server:
To do...
Establish a connection
to the remote SFTP
server and enter SFTP
client view
Terminate the
connection to the
remote SFTP server and
return to user view
Network requirements
As shown in Figure 342, an SSH connection is established between Switch A and
Switch B. Switch A, an SFTP client, uses the username client001 and password
aabbcc to login to Switch B for file management and file transfer.
Use the command...
delete remote-file&<1-10>
remove remote-file&<1-10>
Use the command...
sftp [ ipv6 ] server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { aes128 | des } |
prefer-ctos-hmac { md5 | md5-96 |
sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher
{ aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
help [ all | command-name ]
Use the command...
sftp [ ipv6 ] server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { aes128 | des } |
prefer-ctos-hmac { md5 | md5-96 |
sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher
{ aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
bye
exit
quit

SFTP Configuration Example

Remarks
Optional
The delete command
functions as the remove
command.
Remarks
Required
Execute the
command in user
view.
Required
Remarks
Required
Execute the command in
user view.
Required.
Use any of the commands.
These three commands
function in the same way.
1135