Displaying And Maintaining Snmp - 3Com Switch 4800G 24-Port Configuration Manual

Displaying and
Maintaining SNMP
To do...
Configure target host
attribute for Traps
Configure the source address
for Traps
Extend the standard
linkUp/linkDown Traps
defined in RFC
Configure the queue size for
sending Traps
Configure the lifetime for
Traps
n
The extended linkUp/linkDown Traps comprise the standard linkUp/linkDown Traps
defined in RFC plus interface description and interface type. If the extended
messages are not supported on NMS, you can disable this function and enable the
device to send standard linkUp/linkDown Traps.
To do...
Display SNMP-agent system
information, including the
contact, location, and version
of the SNMP
Display SNMP agent statistics
Display the SNMP agent
switch fabric ID
Display SNMP agent group
information
Display the modules that can
send Traps and whether their
Trap sending is enabled or not
Display SNMP v3 agent user
information
Display SNMP v1 or v2c agent
community information
Display MIB view information
for an SNMP agent

Displaying and Maintaining SNMP

Use the command...
snmp-agent target-host
trap address udp-domain
{ ip-address | ipv6
ipv6-address } [ udp-port
port-number ] params
securityname security-string
[ v1 | v2c | v3
[ authentication | privacy ] ]
snmp-agent trap source
interface-type
{ interface-number |
interface-number.subnumber
}
snmp-agent trap if-mib link
extended
snmp-agent trap
queue-size size
snmp-agent trap life
seconds
Use the command...
display snmp-agent sys-info [ contact
| location | version ]*
display snmp-agent statistics
display snmp-agent local-switch
fabricid
display snmp-agent group
[ group-name ]
display snmp-agent trap-list
display snmp-agent usm-user
[ switch fabricid switch fabricid |
username user-name | group
group-name ] *
display snmp-agent community
[ read | write ]
display snmp-agent mib-view
[ exclude | include | viewname
view-name ]
937
Remarks
Required
Optional
Optional
Standard linkUp/linkDown
Traps defined in RFC are used
by default.
Optional
100 by default
Optional
120 seconds by default
Remarks
Available in any
view