3Com Switch 4800G 24-Port Configuration Manual page 995

Network diagram
Figure 298 Network diagram for FTPing an image file from an FTP server
FTP Client
10.2.2.1/16
Switch
Console
Configuration procedure
# Check files on your device. Remove those redundant to ensure adequate space
for the startup file to be downloaded.
<Sysname> dir
Directory of flash:/
0 drw-
1 drw-
2 -rw- 1216
3 -rw- 1216
14605 KB total (6890 KB free)
<Sysname> delete /unreserved flash:/backup.cfg
# Download the startup file from the server.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1.
Press CTRL+K to abort
Connected to 10.1.1.1
220 FTP service ready
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
331 Password required for abc.
Password:
230 User logged in.
[ftp] binary
200 Type set to I.
[ftp] get aaa.bin bbb.bin
227 Entering Passive Mode (10.1.1.1,4,1).
125 BINARY mode data connection already open, transfer starting for aaa.bin.
.....226 Transfer complete.
FTP: 5805100 byte(s) received in 19.898 second(s) 291.74Kbyte(s)/sec.
[ftp] bye
# You can use the boot-loader command to specify the downloaded file as the
main startup file for next startup. Then restart the device and the startup file of the
device is updated.
<Sysname> boot-loader file bbb.bin main
<Sysname> reboot
10.1.1.1/16
IP network
- Dec 07 2005 10:00:57
- Jan 02 2006 14:27:51
Jan 02 2006 14:28:59
Jan 02 2006 16:27:26
Configuring the FTP Client
FTP Server
filename
logfile
config.cfg
backup.cfg
995