3Com Switch 4800G 24-Port Configuration Manual page 772

772 C 53: AAA/RADIUS/HWTACACS C
HAPTER
n
Specifying the
HWTACACS
Authentication Servers
n
Specifying the
HWTACACS
Authorization Servers
ONFIGURATION
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS
scheme view
Up to 16 HWTACACS schemes can be configured.
■
A scheme can be deleted only when it is not referenced.
■
Follow these steps to specify the HWTACACS authentication servers:
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS
scheme view
Configure the IP address and
port of the primary
HWTACACS authentication
server
Configure the IP address and
port of the secondary
HWTACACS authentication
server
The IP addresses of the primary and secondary authentication servers cannot
■
be the same. Otherwise, the configuration fails.
You can remove an authentication server only when no active TCP connection
■
for sending authentication packets is using it.
Follow these steps to specify the HWTACACS authorization servers:
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS
scheme view
Configure the IP address and
port of the primary
HWTACACS authorization
server
Configure the IP address and
port of the secondary
HWTACACS authorization
server
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
primary authentication
ip-address [ port-number ]
secondary authentication
ip-address [ port-number ]
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
primary authorization
ip-address [ port-number ]
secondary authorization
ip-address [ port-number ]
Remarks
-
Required
Not defined by default
Remarks
-
Required
Not defined by default
Required
The defaults are as follows:
0.0.0.0 for the IP address, and
49 for the TCP port.
Required
The defaults are as follows:
0.0.0.0 for the IP address, and
49 for the TCP port.
Remarks
-
Required
Not defined by default
Required
The defaults are as follows:
0.0.0.0 for the IP address, and
49 for the TCP port.
Required
The defaults are as follows:
0.0.0.0 for the IP address, and
49 for the TCP port.