Gps Logger Function - Icom ID-31E PLUS Basic Manual

■ GPS Logger function

The GPS Logger function enables you to save the location
data from a GPS receiver into a microSD card as a log.
The GPS Logger saves Latitude, Longitude, Altitude,
Positioning state, Course, Speed, Date, and Time.
If you use this GPS Logger while driving, you can check
your driving history on a mapping software.
<About the log file>
If you have the log file imported to a mapping software, you
can display your route as you move on the software map.
L The log files may not be compatible with all mapping software.
L See the Advanced Manual for details on copying the log files
onto your PC.
NOTE:
• The GPS logger function requires a microSD card
(User supplied). See page 7 for attaching details.
• This function is turned ON as the default setting.
Therefore when you insert a microSD card, this function
continuously saves the location data from the GPS
receiver, even if you turn OFF the transceiver, then ON
again.
• To turn OFF the function, do the steps to the right.
• When the microSD card is full, this function will
automatically be paused.
D Turning OFF the GPS Logger function
You can turn OFF the GPS logger function by following the
steps below.
MENU > GPS > GPS Logger > GPS Logger
1. Push [MENU].
2. Select "GPS," "GPS Logger,"
and then "GPS Logger."
[Up]
[ENT]
[Down]
3. Select "OFF."
L To exit the MENU screen,
push [MENU].
7
GPS OPERATION
▼
▼
BASIC MANUAL
7
28