Change Of Maintenance Parts (Maintenancer Only) - Fujitsu IP-900E Hardware User's Manual

5.3.2 Change equipment (Only for CE)
I When the failure situation is not recovered even if you check and follow the instructions by
referring to Section 5.1, "Help Information", the hardware might be failure. Change hardware as
below
CF CARD
The equipment itself is regarded as repair unit. When you regarded it as failure, please change the
equipment.
In case that the optional CF card is installed in the main unit, please do not forget to remove it and
re-install in the replaced unit.
Please refer to Section 2.6, "CF card insertion and removal," for the respective maintenance.
E
PWR ALM OPT LINK /ACT
RDY IN 100M
DWN
75
Chapter 5 Troubleshooting
IP-900E/IP-900D/IP-900IID