Index List Search - Ganz CDR-16T Operation Manual

7-2. Index List Search

The CDR-16T memory saves an index list of alarm points. Up to 3000 indexes can be stored for
each hard disk. The index list can be either scroll searched (by selecting all 6 alarm types) or a
specific type of alarm can be searched for. See sec. '5. Using Menus' for information on making
menu selections.
The example shown here is only valid when searches are performed via the front panel buttons.
To performed searches via RS-232C or network control, see sec. 'Appendix. RS-232C Control
Commands'.
(•¦ Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
(Continued following page.)
If no hard disk has been assigned for playback use (PB
USE ONLY / PB/REC USE) in menu, DATE / TIME
SEARCH mode cannot be performed.
DATE / TIME SEARCH mode cannot be accessed when
CDR-16T is in playback mode.
[DATE/TIME SEARCH]
SCSI ID #0
01/02/2001
17:27:30
DIR – BACKWARD
INDEX – ALSRMV
SEARCH
CANCEL
RECORD TERM
START 12/28/2000
‡A
:
END 01/05/2001
CURRENT
If enter button is pushed while CURRENT is cursor
selected, the present time / date (now) will be entered at
as date / time ‡B .
Important
‡B
00:00:00(THU)
07:30:25(FRI)
EXIT
Note
93
‡@