Table of Contents
Advertisement
5. Using Menus
There are two key menu displays, which are used to make all the main operational setup and
programming during CDR-16T use; MAIN and FUNCTION.
5-1. Accessing MAIN Menu
The MAIN Menu and it's related Sub Menus are used to make all general operational settings
and to display related settings. Push small non-metallic tool into Main Menu hole to push access
Main Menu button.
When MENU is pushed, a MAIN (top) menu similar to below will be monitor displayed.
u
Accessing Sub Menus From Main Menu
There are 3 ways you can select a sub menu from this menu.
Ø Procedure 1: (dial / ENTER )
Turn jog / shuttle dial to move selection cursor in menu to required item. Push ENTER to go to
sub menu or exit.
Ø Procedure 2: (arrow buttons
Push arrow buttons to move selection cursor in menu to required item. Push ENTER to go to
sub menu or exit.
Ø Procedure 3: (1 button access) This procedure can only be used in menu shown above.
Push CAMERA SELECT button with matching number.
Example: Push 2 (SPLIT POSITION), to go to 'SPLIT POSITION' sub menu.
(Continued following page.)
(Continued following page.)
MAIN MENU
Cursor selected
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
/
/ ENTER )
PROTECT
SPLIT POSITION
RECORD
TIMER PROGRAM
AUTO SEQ TIME
TITLE
DATE / TIME
DISPLAY MODE
ALARM / LOSS / SENSOR
HDD
OTHER
SYSTEM
SENSOR
DVD
EXIT
38
Advertisement
Table of Contents
