Table of Contents
Advertisement
5-2. Accessing Function Menus
The Function Menu and it's related Sub Menus are used to search recorded material, program
timer settings and select what information is displayed on screen (superimposed)
When FUNC is pushed, a menu similar to below will be monitor displayed.
Sub-menus
u
Accessing Sub Menus
There are 2 ways you can select a sub menu in this function menu.
Ø Procedure 1: (dial / ENTER )
Turn jog / shuttle dial to move selection cursor in menu to required sub menu. Push ENTER to
go to that sub menu.
Ø Procedure 2: (arrow buttons
Push arrow buttons to move selection cursor in menu to required sub menu. Push ENTER to go
to sub menu.
u
Changing Menu Parameter Settings
To select and modify settings in this type of menu, use the front panel controls. Standard button
use is as listed in the chart in 5-1. Accessing MAIN Menu previously.
Ø
Procedure to Change Menu Parameter Settings
‡@ Turn jog / shuttle dial or push arrow buttons to move selection cursor in menu to required
item.
‡A Push •¨ or •¨ + Dial to change setting.
(Continued following page.)
See sec. '6. MAIN Menu Settings' for details on
operations set / performed here. If no menu selection is
made within 1 min., recorder will automatically return to
normal operation. (Menu no longer displayed.)
DATE/TIME SEARCH
INDEX LIST SEARCH
HDD INFORMATION
REC PROGRAM – NO.1
SUPER – ON
POWER ON/OFF LOG
USER BACKUP DVD
DVD INDEX SEARCH
PLAYBACK DRIVE-HDD
DVD INFORMATION
/
/ ENTER )
Important
[FUNCTION]
41
Parameter
settings
(Highlighted gray
for
example
purposes.)
Advertisement
Table of Contents
