Ganz CDR-16T Operation Manual page 26

‡C Error
ERR mark appears when CDR-16T operation is abnormal. Error message (hard disc or DVD
event error) will be displayed whenever HDD or DVD (optional) operation is incorrect. If
buzzer response set to ON, a tone will also sound when error occurs. (Push AUTO button to
stop buzzer sounding.)
‡D Record Program
If playback view, shows record PROGRAM and REC MODE under which recording took
place. If live view, shows record PROGRAM and REC MODE under which recording will take
place when REC is pushed.
If live view, TIMER program set (not recording), shows TIMER (record PROGRAM). If live
view, TIMER program set (recording), shows record PROGRAM, REC MODE and (T) mark.
Where:
Display
NO1 – NO5
TIMER
PREALM
1SHOT
CONT
A-LAST
A-SWIT
A-ALL
A-PRI
A-SEQ
(T)
(•¦ See sec. '6-4. Timer Program' for details on TIMER program.)
‡E Record Interval
If playback view, shows type of record interval and interval setting under which recording took
place. If live view, shows type of record interval and interval setting currently selected.
Where:
Display
TL
UD
Interval setting
‡F Record Quality
If playback view, shows record QUALITY under which recording took place. If live view,
shows record QUALITY currently selected.
(Continued following page.)
Program number (1-5) settings applied when REC is pushed.
TIMER program is set but currently not recording.
Pre-alarm record. (See sec. '6-3-2. Pre Alarm Record'.)
One shot record. (See sec. '6-3-3. One Shot Record'.)
Continuous record, alarm rec. mode set to OFF. (See sec. '6-3-
1. Continuous Record'.)
Continuous record, alarm rec. mode set to LAST CHANNEL.
Continuous record, alarm rec. mode set to SWITCHOVER.
Continuous record, alarm rec. mode set to ALL CHANNEL.
Continuous record, alarm rec. mode set to PRIORITY.
Continuous record, alarm rec. mode set to SEQUENCE.
TIMER program is set and currently recording.
Time-lapse
Update
See sec. '6-3-5. Regarding Timelapse / Update Mode Setting'
for information on settings available.
20
Description
Description