Dvd Index Search - Ganz CDR-16T Operation Manual

9-9. DVD Index Search

Backup record data on DVD-RAM disk can be displayed using the DVD index search function.
When images are backed up to the DVD-RAM disk, the index point is registered on the index list.
The DVD index list can record a maximum of 2048 index items. The index list can be either scroll
searched (by selecting all 6 alarm types) or a specific type of alarm can be searched for. See sec.
'5. Using Menus' for information on making menu selections.
The example shown here is only valid when searches are performed via the front panel buttons.
To performed searches via RS-232C or control, see sec. 'Appendix. RS-232C Control
Commands'.
u
To Search DVD Index:
‡@ Verify CDR-16T is in normal operation mode, then push FUNC button to display
FUNCTION menu.
‡A Move cursor to DVD INDEX SEARCH, the push ENTER button. Display should change
similar to below
(•¦ Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
‡B The index time and record date of the image are displayed ‡@ , The record term from
START/STOP is displayed ‡A .
(Continued following page.)
RECORD TERM
START 04/23/2001
END 06/01/2001
CURRENT
If enter button is pushed while CURRENT is cursor
selected, the present time / date (now) will be entered at
as date / time ‡B .
[DVD INDEX SEARCH]
REC TIME
05/23/2001
21:20:00
DIR-FORWARD
SEARCH
CANCEL
00:00:00 (MON)
00:00:00 (MON)
EXIT
Note
131
‡@
‡A