Timer Auto Backup; Auto Backup Using Timer Program - Ganz CDR-16T Operation Manual

u
To resume Auto Backup
Repeat previous procedure, but set ENABLE instead of DISABLE.

9-7. Timer Auto Backup

Auto backup record can also be started/stopped using the timer program function if you need
backup recording of timer programs (No. 1-5) performed over a specific time period.

9-7-1. Auto Backup Using Timer Program

‡@
First set BACKUP in RECORD program menu to TIMER or AUTO for each PROGRAM
(No. 1-5) that you want DVD option to AUTO BACKUP. For example, if backup of
program No. 1or 3 needed, make settings in display for No. 1 and No. 3 set ups.(See
sec. '6-3. Record Programming' previous for details on making RECORD programs.)
‡A Next, open TIMER PROGRAM menu from MAIN menu. At position1,set REC PRG to
BKUP. If auto set, only alarm data within the set timer will be recorded. If set to timer all
data will be recorded. (See sec. '6-4. Timer Program' previous for procedure to make
settings here.)
‡B Make settings for lines 2-8 in TIMER PROGRAM MENU as needed. Only line 1 can be
set to BKUP (backup). An example is shown on following page.
(Continued following page.)
This function cannot be used if TIMER AUTO BACKUP
is used. (See sec. '9-7. Timer Auto Backup' following for
details.
PROGRAM-NO.1
REC MODE- CONTINUOUS
QUALITY-NORMAL
AUDIO-OFF
REC CHANNEL
TIMELAPSE MODE 0.02SEC
ALARM REC MODE- SEQUENCE
ALARM QUALITY – SUPER
TRIGGER
ALARM SEQ REC
SET
Important
[RECORD]
NORM=16 FAST=0 SENS = 0
UPDATE(NORM,SENS)= 0.32SEC
UPDATE(FAST)=***.**SEC
TOTAL REC TIME=30H52M
BACKUP-TIMER
EXIT
126
Set to TIMER
or AUTO