Ganz CDR-16T Operation Manual page 56

‡E NORM, FAST, SENS indications
Shows how many channels are currently set to NORM, FAST and SENS at setting ‡D sub
menu.
‡F TIMELAPSE / UPDATE MODE (refresh mode and record interval)
Sets refresh mode and record interval. Record interval settings available at this line will
depend on refresh mode setting (TIMELAPSE or UPDATE) made here. See sec.'6-3-5.
Regarding Timelapse / Update Mode Setting' for details on settings available for NTSC and
PAL.
‡G UPDATE (NORM, SENS) , UPDATE (FAST) , TOTAL REC TIME
Shows the record interval for cameras set to NORM / SENS and FAST update based on
settings at ‡D and ‡F previous. Total record time is calculated based on settings made at ‡B ,
‡D and ‡F. (
***
‡H ALARM REC MODE
Sets CDR-16T series record response upon alarm input from one or more cameras. When an
alarm is input, record automatically changes to real time record mode (NTSC 60, PAL 50
frames / sec.). See sec. '6-3-7. Regarding Continuous Record Setting' for details.
(Continued following page.)
If any channels are set to FAST or SENS here, UPDATE
MODE record interval cannot be selected at ‡F following.
If program set to UPDATE MODE here, time setting at
this line may make simultaneous record / playback
impossible depending on the number of camera channels
being recorded. See sec. '6-3-4. Regarding Record
Channel Setting' and '6-3-5. Regarding Timelapse /
Update Mode Setting' following regarding unit operation.
indications = 0)
Camera channels set to SENS are included with NORM
channels because FAST recording is dependent on alarm
input.
Important
Important
Note
50