Table of Contents
Advertisement
‡I
V RECOVER
Sets recovered video index indication display on or not on. (Split screen view when set to ON will
display this setting at each camera position.)
Display mode ‡J – ‡M following will be displayed full screen
live and recorded conditions displayed during full screen
playback if FULL is selected.
Display mode ‡J – ‡M following all have the two settings
shown below.
‡J
OPERATION
Sets recorder operations (PLAY, STOP, etc.) indication display on or not on.
‡K REC MODE
Sets record mode indication display on or not on.
‡L INTERVAL
Sets record interval indication display on or not on.
‡M QUALITY
Sets record quality indication display on or not on.
‡N ADDRESS
Sets superimposition of timeline count or percentage number ON / OFF on monitor display
output. Also sets whether superimposed data displayed in count up or count down mode.
Available selections are as shown below. Available selections are as shown below.
ON (COUNT U)
ON (COUNT D)
FULL (COUNT U)
FULL (COUNT D)
FULL (PERCENT)
OFF
Important
Related information superimposed when
FULL
full screen display mode only.
OFF
Related information not superimposed.
HDD position given as counter reference number during split
displays. Counter will count up if this selection is made. (If ON
here, [ON count D] to OFF.)
HDD position given as counter reference number during split
displays. Counter will count down if this selection is made. (If
ON here, [ON count U] to OFF.).
HDD position given as counter reference number during split
displays. Counter will count up if this selection is made. (If ON
here, FULL [ON count D] to OFF.)
HDD position given as counter reference number during split
displays. Counter will count up if this selection is made. (If ON
here, FULL [ON count U] to OFF.)
HDD position given as percentage point on total timeline
during full screen display.
No timeline count or percentage superimposing on material
output.
74
Advertisement
Table of Contents
