Ganz CDR-16T Operation Manual page 27

Where:
Display
SUP
HI
NOR
LOW
(•¦ See sec. '6-3. Record Programming' for information on record QUALITY.)
‡G HD Address
If playback view, shows hard disk ID no. and time point information. If live view (not recording),
shows hard disk ID no. and time point where previous recording stopped, next recording will
start. If live view (recording), shows hard disk ID no. and time point passage while recording.
Where:
Display
1H10M30S (counter)
50% (percent)
Counter can be set to count up or count down mode. (See sec.
'6-8. Display Mode' for details on counter operation settings.
‡H Alarm Index
If playback view, shows alarm index of image currently monitor displayed if image recorded
under alarm conditions.
If live view, alarm index (for type of alarm occurring) will appear when alarm occurs for
camera currently monitor displayed.
Where:
Display
A Alarm
L video Loss
S Sensor
V image reVersion
R Record start
M Manual
V, R and M alarm indexes mark a single time point and
are only screen displayed for a short time. See sec. '7-2.
Index List Search' for more information on alarms.
Super (Best resolution on playback)
High
Normal
Low (Lowest resolution on playback)
Relative time from HD start point
Remaining percentage of HD available for recording
(whole numbers)
Note
Alarm signal input.
Video signal loss.
Alarm input from sensor card.
Image returns (to video loss channel) during record.
Time point where recording started.
Alarm manually initiated. (REC button pushed during
recording.)
Note
21
Description
Description
Description