Table of Contents
Advertisement
Assignment settings cannot be made if the following conditions
exist:
a) Disk currently being recorded to.
b) Disk in AUTO Record mode.
c) Disk currently in playback operation (play, jog or shuttle).
d) Disk currently in DVD unit has overwrite protect ON.
‡A REC BYTE
Shows the remaining capacity of DVD-RAM currently installed to DVD-RAM drive.
If assignment cannot be performed, WARNING will
appear on this menu screen. Push ENTER to return to
previous menu.
‡B STATUS
Indicates the operational conditions currently valid for the DVD option.
FORMAT •":
DVD ERROR:
CLEAR EVENT •F
EVENT ERROR•F There is an error in the event control information on DVD. See sec '6-
NOT ASSIGNED•F DVD use (PB USE ONLY / PB/REC USE) not assigned. DVD cannot be
PB USE ONLY•F
PB / REC USE•F
NO DISK•F
‡C REC
Flashing asterisk mark displayed if record in progress.
‡D PLAY
Flashing asterisk mark displayed if playback operation in progress (normal, jog or shuttle
search).
‡E TOTAL CAPACITY
Indicates total capacity (PB/REC Use) of DVD-RAM currently installed.
‡F EXIT
Returns user to ASSIGN DVD USE menu when selected and ENTER is pushed.
Note
Important
During the DVD formatting process this indication displays the progress
of the formatting.
There is a physical defect in the DVD. Re-format once. If DVD ERROR
is still indicated consult with your CBC representative.
Used to access (CLEAR EVENT) sub menu. Sub menu can be
accessed if an asterisk is next to it. Cursor select asterisk mark and
push ENTER to access sub menu. Select YES / NO in sub menu and
push ENTER again to return to this menu.
10-3. Clear Event' for details.
used for record or playback operations.
DVD can only be used for playback and search operations. Cannot be
used for record operations.
DVD can be used for playback, search and record operations.
A DVD-RAM disk is not present in the DVD drive.
108
Advertisement
Table of Contents
