Format Hdd - Ganz CDR-16T Operation Manual

6-10-2. Format HDD

This menu allows user to format connected hard disks. See sec. '5-1. Accessing MAIN Menu'
for information on making menu selections.
‡@
Where:
‡@ ID (SCSI ID)
Used to access [FORMAT HDD] sub menu. Sub menu can be accessed if ID # has an
asterisk next to it. Cursor select asterisk marked ID # and push ENTER to access sub menu
for related drive. Select YES / NO in sub menu and push ENTER again to return to this menu.
Sub menu can only be accessed for hard disk drives having status codes NOT ASSIGNED,
HDD ERROR or EVENT ERROR.
Hard disks should be formatted when:
a) Disk is first installed / connected to CDR-16T.
b) Disk errors occur due to mechanical shock, age or overuse.
(Continued following page.)
[FORMAT HDD]
‡A
ID REC TIME
#0 * 1H17M
#1 – 2H34M
#2 – 2H34M
#3 – 2H34M
#4 – – – – –
#5 – – – – –
#6 – – – – –
#7 – – – – –
TOTAL REC TIME –
‡E
To view page 2 of this menu, cursor select ID #7 and
move cursor 'down' to ID #8 (on page 2). Page 2 will be
automatically displayed. To return to page one, cursor
select ID #8 on page 2 and move cursor 'up' to ID #7 (on
page 1).
Settings ‡A – ‡E are not explained here as they are
explained in sec. '7-3. HDD Information' previous.
‡B
STATUS
NOT ASSIGNED
PB/REC USE
PB/REC USE
FORMAT 50%
NONE
NONE
NONE
NONE
5H08M
EXIT
Note
83
‡C 1/2
REC PLAY
– –
‡D
* *
– –
– –
– –
– –
– –
– –