Formatting Dvd - Ganz CDR-16T Operation Manual

9-3. Formatting DVD

This menu allows user to specify how the optional DVD-RAM drive disk will be used. Formatting
DVD settings determine how your DVD option is used during operations as well as giving the
user information on the operational status of the DVD-RAM option. Information displayed in the
menu should be as indicated below when this sub menu is accessed from DVD menu.
To access, cursor select ASSIGN DVD USE, then push ENTER button at front panel.
‡B
‡@
u
To Format DVD
‡@ Verify STATUS to NOT ASSIGNED, DUE ERROR or EVENT ERROR. Access ASSIGN
DVD USE (sec. '9-2-1. Assigning DVD Use' previous) to, PB/REC USE or PB USE ONLY.
And change settings to NOT ASSIGNED. Return to this menu. If to DVD ERROR or
EVENT ERROR, you can stay in this menu and format.
‡A Verify indication for REC and PLAY similar to those shown in menu above
‡B Cursor select DVD and push ENTER at front panel to access FORMAT DVD sub menu
shown below (This menu can only be accessed if STATUS indication to NOT ASSIGNED,
DVD ERROR, or EVENT ERROR.
(Continued following page.)
[FORMAT DVD]
CAPACITY
DVD•– 4.4G
TOTAL CAPACITY -
Move the cursor down by pushing the •« button. To
change the value, push the •¨ button.
[FORMAT DVD]
YES
NO
STATUS •@•@ REC •@ PLAY
NOT ASSIGNED•@•@•– •–
4.4G BYTE
EXIT
Note
109
‡A