Table of Contents
Advertisement
7-1. Date / Time Search
DATE / TIME SEARCH allows user to input a day and time reference for search to locate
required material. Once date / time is input, recorder will automatically go to the material which
was recorded closest to (or on) the date / time input. See sec. '7. Function Menu Settings' for
information on making menu selections.
The example shown here is only valid when searches are performed via the front panel buttons.
To performed searches via RS-232C or network control, see sec. 'Appendix. RS-232C Control
Commands'.
(•¦ Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
u
To Search:
‡@ Select hard disk SCSI ID number at ‡@ . Record start and stop times will be displayed for
connected hard disk at ‡A when SCSI ID number is displayed.
(Continued following page.)
If no hard disk has been assigned for playback use (PB
USE ONLY / PB/REC USE) in menu, DATE / TIME
SEARCH mode cannot be performed.
DATE / TIME SEARCH mode cannot be accessed when
CDR-16T is in playback mode.
[DATE/TIME SEARCH]
RECORD TERM
START 12/28/2001 00:00:00(THU)
END
01/05/2001 07:30:25(FRI)
CURRENT
If enter button is pushed while CURRENT is cursor
selected, the present time / date (now) will be entered at
as date / time ‡B .
Important
SCSI ID #0
:
EXIT
Note
91
‡@
01/02/2001
•@‡B
17:27:30
‡A
Advertisement
Table of Contents
