Table of Contents
Advertisement
‡C REC PROGRAM
Allows user to select which record program (NO.1 – NO.5) settings are applied during manual
record operation or to select auto time record operation (TIMER).
Record program (NO.1 – NO.5) settings and TIMER program can be viewed by pushing ENTER
while REC PROGRAM parameter setting is selected. (Push ENTER again to return to
FUNCTION menu.) Note that accessing record program settings and TIMER program by this
method is for verification purposes only. To change these settings, see sec.
Programming'. See sec. '6-4. Timer Program' for information related to setting program times for
auto time record.
‡D SUPER
Allows user to set display settings ON / OFF. (Note that ERR display is an automatic display that
is only set ON / OFF here.) To select items to be displayed (superimposed) on the monitor and
recorded, refer to sec. '6-8. Display Mode'.
‡E POWER ON/OFF LOG
Accesses unit power ON/OFF log. Shows date, day and time for each time power is switched
ON or OFF at the unit. (See sec. '7-4 Power ON / OFF Log' for details on this function.)
‡F USER BACKUP DVD
Directly accesses USER BACKUP DVD menu that lets you DVD backup record specific events
on HDD. (See sec.'9-5. User Select Backup' for details on this function.)
‡G DVD INDEX SEARCH
Directly accesses DVD INDEX SEARCH that lets you search DVD contents at unit. (See
sec.'9-9. DVD Index Search' for details on this function.)
‡H PLAYBACK DRIVE
Directly accesses a sub menu that allows the user to set if HDD or DVD drive is to be used for
playback operations.
‡I
DVD INFORMATION
Directly accesses information about the DVD drive used in your unit. (See sec.'9-10. DVD Drive
Information' for details on this function.)
Lines 7-10 will not be displayed within the function menu
if DVD is not installed.
u
Special Button Functions:
Button
ENTER
Important
REC PROGRAM
Goes to information sub menu (push
selected
ENTER again to return to this menu)
Description
90
'6-3. Record
Advertisement
Table of Contents
