Table of Contents
Advertisement
4-6. Record / Playback
4-6-1. Manual Record
Note that settings made in menus will affect how record is performed when the procedure
below is used. See sec. '6-3. Record Programming' for settings that need to be made prior to
record operations. See sec. '5. Using Menus' to select which group of record settings
(program) to use when recording with this procedure.
‡@ To start recording, push REC to lit.
‡A To stop recording, push and hold STOP
button approx. 2 sec. REC goes to unlit
and rec-cord operation is exited.
Manual alarm index
Manual alarm indexes can be used to create alarm points that can later be recalled using the
INDEX LIST SEARCH function. To create a manual alarm index, push REC (one time for
each point you want to create) while recording. For information about other alarm indexes
see sec. '7-2. Index List Search'.
If TIMER program has been selected at REC PROGRAM
in the FUNCTION menu, pushing REC will not start
record operation. For information on timed record
operations see sec. '4-6-2. Auto Record'.
Record interval must be set to 0.10 sec. or more to use
simultaneous record and playback function. See sec.
'6-3-5. Regarding Timelapse / Update Mode Setting' for
setting related information.
4-6-2. Auto Record
To use auto record function, record start / stop times must first be programmed in the TIMER
menu, then TIMER must be selected in the FUNCTION menu as the REC PROGRAM to be
applied.
See sec. '6-3. Record Programming' for menu setups required and other information related
to record operations. See sec. '6-4. Timer Program' for information related to setting program
times for auto time record (timer program). See sec. '5. Using Menus' for information related
to selecting which timer program to use.
FUNC
M ENU
Important
36
‡@
CONTROL
STO P
PLAY
JOG/SHTL
ENTER
‡A
Advertisement
Table of Contents
