Ganz CDR-16T Operation Manual page 100

u
To Search:
‡@ Select hard disk SCSI ID number at ‡@ . Record start and stop times will be displayed for
connected hard disk at ‡A when SCSI ID number is displayed.
‡A Move selection cursor to date and time at ‡B . Menu will change as shown below.
Index list cursor
‡B Enter date and time for search to start from at ‡B .
‡C Enter search direction (DIR) at ‡C .
BACKWARD searches for indexes registered before input time. (Index listed at NO.1 closest to
input time.)
FORWARD searches for indexes registered after input time. (Index listed at NO.1 closest to
input time.)
‡D Select alarm type to search for ‡D .
Turn off letters in ALSRMV line for the type of alarms you do not want to search for. (Pushing •¨
sets cursor selected letter ON / OFF.) Example, to only search for alarm input (A) and video loss
(L) alarms, change code to A L •\ •\ •\ •\. See ‡F below for a list of alarm codes.
‡E Once parameters at ‡B •\ ‡D have been set, move cursor to SEARCH and push ENTER to
start search function. Selection cursor automatically moves to index list.
‡F 100 alarm time points closest to date and time input at ‡B will be automatically recalled.
(Index listed at NO.1 closest to input time.) Alarm time point information will be displayed at
‡G and cursor selected time point (at alarm start point) will be displayed at ‡H .
(Continued following page.)
[INDEX LIST SEARCH]
‡H
NO DATE
1. - - / - - / - - - -
2. - - / - - / - - - -
3. - - / - - / - - - -
4. - - / - - / - - - -
5. - - / - - / - - - -
SCSI ID #0
01/02/2001
17:27:30
DIR – BACKWARD
INDEX – ALSRMV
SEARCH
CANCEL
TIME CH INDEX
- -:- -:- - - - •\ •\ •\ •\ •\ •\
- -:- -:- - - - •\ •\ •\ •\ •\ •\
- -:- -:- - - - •\ •\ •\ •\ •\ •\
- -:- -:- - - - •\ •\ •\ •\ •\ •\
- -:- -:- - - - •\ •\ •\ •\ •\ •\
94
‡B
‡C
‡D
‡E
‡F
‡G