Computer / Remote Control Connection - Ganz CDR-16T Operation Manual

3-1-2. Computer / Remote Control Connection

The CDR-16T can be controlled either via a user fabricated remote control device or a
computer. See sec. '3-2-1. RS-232C Connector' when controlling via computer. See sec.
'3-2-2. Remote Connector' when controlling via remote device.
1 2 3 4 5
IN
A U TO
O U T
R S-2 3 2C
Termination
S CS I 6 8 p i n (A m p h e n o l )
connector
Must be connected if no
external HDD used.
(Supplied as accessory)
Computer
Only one of the connections shown above is normally made
when configuring the CDR-16T for remote control.
Control via RS-232C connector requires use of command and
request codes given in the RS-232C appendix of this manual.
CAM ER A
6 7 8 9 10 1 1
R EM OT E
SCSI -A AL ARM
Important
1 2 13 14 15 16
AU DIO M ON IT O R O UT
L R
1 2
IN
Y/ C
OUT
Remote Control
device
(User fabricated)
9
S E R . N o .
T4 .0 A
PU SH
AC 1 0 0 -2 4 0 V - 5 0 /6 0 Hz IN