Ganz CDR-16T Operation Manual page 98

‡A Move selection cursor to date and time at ‡B . Menu will change as shown following.
‡C
(•¦ Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
‡B Enter date and time you wish to search for at ‡B shown above.
‡C Recorded material closest to date and time input at ‡B will be automatically recalled. Alarm
time point information will be displayed at ‡C and recorded image (at alarm start point) will
be displayed at ‡D .Items displayed at ‡C :
DATE
TIME
CH
INDEX
(if material
was alarm
recorded)
u
To View Alarm Video:
Push ENTER to exit search screen and playback (full screen view) recorded material just found.
u
To Exit Without Viewing Alarm Video:
Move cursor to EXIT at bottom of menu. Push ENTER to return to FUNCTION menu.
Or
Push FUNC to exit FUNCTION menu.
[DATE/TIME SEARCH]
‡D
DATE TIME
- - / - - / - - - - - -:- -:- - - - •\ •\ •\ •\ •\ •\
CURRENT
Actual date of material found.
Actual time of material found.
Camera channel of material found.
Shows type of alarm of material found.
A Alarm
L video Loss
S Sensor
R Record start
M Manual
V image reVersion
SCSI ID #0
01/02/2001
17:27:30
CH INDEX
EXIT
Alarm input occurred during recording.
Video loss occurred during recording.
Alarm input from sensor card occurred during
recording.
Time point where recording started.
Alarm manually initiated. (REC button pushed
during recording.)
Image returns (to video loss channel) during
record.
92
‡B