Ganz CDR-16T Operation Manual page 46

u
Changing Menu Parameter Settings
To select and modify settings in this type of menu use the front panel controls. Standard button
use is as listed in the following chart. (Parameter settings in this sub-section are highlighted gray
for example purposes only.)
Button
Dial
+ Dial
ENTER
MENU
u
Procedure to Change Menu Parameter Settings
‡@ Turn jog / shuttle dial or push arrow buttons to move selection cursor in menu to required
item.
‡A Push •¨ or •¨ + Dial to change setting.
‡B Turn jog / shuttle dial or push arrow buttons to move selection cursor in menu to SET.
‡C Push ENTER to input parameter settings and exit function menu or return to previous
menu if in sub menu.
(Continued following page.)
Moves to sub menu / decrements parameter with each push.
Moves to higher menu / increments parameter with each push.
Scrolls through possible sub menu selects / menu parameters.
Scrolls through possible settings by one each push
(changes setting (in gray area) currently selected).
Scrolls through possible settings at high speed
(changes setting (in gray area) currently selected).
Sub menu selected Goes to selected sub menu.
Parameter setting
selected
WARNING
on screen
SET selected
EXIT selected
Exits function menu (if parameter settings not input, settings are
canceled).
Whenever a menu uses other panel controls, or buttons
listed here have different functions, a chart similar to
above will be included with the menu explanation.
Description
Action depends on menu / parameter
setting selected. Possible actions are:
Goes to information menu (ENTER again to
return to previous menu).
Inputs parameter settings and returns user
to previous menu.
Starts action (i.e. format).
No action performed.
Returns user to previous menu.
Inputs parameter settings and returns user
to previous menu.
Sub Cancels parameters and returns
menu user to previous menu.
Main
Exits main menu.
menu
Note
40