Table of Contents
Advertisement
‡E TOTAL REC TIME
Shows total possible min. recording time for connected hard disks assigned PB/REC USE.
u
Special Button Functions:
Button
ENTER
7-3-2. Specified HDD
This sub menu is accessed when a SCSI ID number in the [HDD INFORMATION] menu is
selected and ENTER is pushed. It contains information concerning the selected hard disk.
Settings cannot be changed via this menu. Push ENTER again to return to previous menu.
‡@
‡A
‡B
‡C
‡D
‡E
( Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
Where:
‡@ SCSI ID
Shows ID number assigned to hard disk.
‡A MODEL NAME
Shows hard disk model (name / number).
‡B VENDOR NAME
Shows hard disk manufacturers name.
‡C REC TIME
Shows min. record time possible for hard disk. Time shown here is for realtime recording
(NTSC 60 fields / sec., PAL 50 fields / sec.) with quality set to SUPER. Lower quality setting
and / or different record interval settings will allow user to extend hard disk recording time.
(Note that this display will always show minimum record time possible.)
(Continued following page.)
ID # selected
[HDD INFORMATION]
SCSI ID –
MODEL NAME –
VENDOR NAME –
REC TIME –
STATUS –
RECORD TERM
START
END
EXIT
Description
Goes to [HDD INFORMATION] sub menu
for selected drive (push ENTER again to
return to this menu)
#0
MAJ3364MC
FUJITSU
2H34M
HDD ERROR 1-2345
12/28/2000 : 00:00:00(THU)
01/05/2001 : 07:30:25(FRI)
98
Advertisement
Table of Contents
