Ganz CDR-16T Operation Manual page 92

Sub menu can only be accessed for hard disk drives having status codes NOT ASSIGNED or
EVENT ERROR.
Hard disks should be cleared when:
a) User wants to erase all data from hard disk.
b) Disk errors occur (STATUS is EVENT ERROR).
If you have connected external hard drives, but they do not
appear in this list (STATUS is NONE), verify that a SCSI ID
number has been assigned at that hard drive unit. (Consult
drive manual for ID setting procedure at drive side.)
Sub menu (shown below) is used to erase all data from hard disk. Cursor select YES and
push ENTER to erase disk and return to previous menu. (To return to previous menu without
erasing disk, cursor select NO and push ENTER.)
CLEAR EVENT
•¨YES
NO
If disk cannot be erased, 'WARNING' will appear on this menu
screen. Push ENTER to return to previous menu. Once
CLEAR EVENT process is started, it cannot be stopped.
u
Special Button Functions:
Button
Asterisk
marked ID #
selected
ID # selected
ENTER YES selected
NO selected
'WARNING'
message on
screen
Note
[CLEAR EVENT ]
ID # 0 ?
Important
Description
Goes to [CLEAR EVENT] sub menu.
No action performed.
Disk data clear initiated (user returned to
previous menu when disk cleared).
Returns user to previous menu.
Returns user to previous menu.
86