Ganz CDR-16T Operation Manual page 41

Live / Playback Mixed Sequence:
If main position in live view group has been assigned for playback use, playback screen will
not change during auto sequence. Only live channels will be changed (updated) during auto
sequence mode.
u
Example 1: LV/PB to lit for live view. 4-split A – F channel groups.
Main screen = playback (PB) material
Inputs connected = CH1 – CH5, CH7 – CH12 (appearing in groups A – C)
No input connected = CH6, CH13 – CH16 (Since all positions within groups D, E and F have
no inputs these groups are skipped.)
Live A
PB L2
L3 L4
Likewise, if main position in playback group has been assigned for live use, only main
position will be changed (updated) during auto sequence mode. Remaining positions are
playback and views will not change during auto sequence. Switchover will occur based on
dwell time settings set for full screen channels. (See sec. '6-5. Auto Seq Time'.)
u
Example 2: LV/PB to unlit for playback. 4-split channel group A selected.
Main position = live material
Inputs connected = CH1 – CH5, CH7 – CH12
Skipped (dwell time set to 0 sec.) = CH8, CH12
Covert (skipped) = CH5
PB (groupA)
L1 PB 2
L2 PB 2
PB 3 PB 4
L3 PB 2
PB 3 PB 4
L4
PB 3 PB 4
PB 3
No input connected = CH6, CH13 – CH16
Live B
PB
L7
PB 2
L7 PB 2
PB 4
L9 PB 2
PB 3 PB 4
L10 PB 2
PB 3 PB 4
L11
PB 3 PB 4
PB 3
Black
L8
Channel / Dwell Time Setting
(full screen dwell time setting)
CH1 =
CH2 =
CH3 =
CH4 =
CH5 =
CH6 =
CH7 =
CH8 =
PB 2
CH9 =
CH10 =
PB 4
CH11 = 5 sec. dwell time
CH12 =
35
Live C
PB L10
L11 L12
5 sec. dwell time
3 sec. dwell time
5 sec. dwell time
3 sec. dwell time
Skipped (covert setting)
Skipped (no input)
5 sec. dwell time
Skipped (0 sec. dwell time)
5 sec. dwell time
3 sec. dwell time
Skipped (0 sec. dwell time)