Zoom - Ganz CDR-16T Operation Manual

4-4-1. Zoom

This feature allows the user to select and zoom in on specified part of full screen displayed
camera video. This function cannot be used during auto sequence operation or with split
screen displays. The procedure to initiate zoom operation and select area to view is as
follows.
15
Ø
Refer to sec. '4-4. Full Screen Display Operations' and select any single camera for full screen
display. Push ZOOM to lit. (Zoom screen may take approx. 2 sec. to appear.) The figure below
illustrates how zoom will occur. Note that the last zoom set area for selected camera will be
expanded approx. x2 size. (Dotted line in figure below shows default zoom area.)
Original full screen
(Continued following page.)
‡@
MONITOR
16 SPLIT CH ZO OM *LV/PB
CDR-16T CDR-16T CDR-16T CDR-16T
FRAME SEQ UENCE RECORDER
Last selected
(or default)
zoom area
‡A
CONT ROL
FUNC REC STOP
MENU
Digital Recorder Digital Recorder Digital Recorder
Digital Recorder
FS R-10 0
REV
‡B
Zoom screen
Line box gives
downscaled
full camera
view reference
25
PLAY JOG/SHTL
ENTER
FWD
Grey box mark
gives reference
for the area of
full screen now
expanded