Regarding Record Channel Setting - Ganz CDR-16T Operation Manual

‡E TRIGGER
Sets which type of input trigger will initiate ONE SHOT record operation. See sec '6-3-6.
Regarding Trigger Setting' for details.
OFF
ALARM
SENSOR
ALM / SENS
u
Example: INTERVAL = 5 FIELDS, TAKES = 3 TAKES (1 – frame shots)
Alarm record will be as below.
Fields =
No
Record
Takes =
Alarm input

6-3-4. Regarding Record Channel Setting

REC channel settings in the record program sets frequency of update for each camera
channel or whether the camera channel skipped (not recorded) when record program is
applied. To access REC CHANNEL sub menu, move cursor to REC CHANNEL setting in
RECORD menu and press ENTER. REC CHANNEL sub menu similar to below should be
displayed.
‡@
Alarm record operation not initiated.
Input via external sensor devices (rear panel alarm input
connector) initiates alarm record operation.
Input via sensor board installed to CDR-16T initiates alarm
record operation.
Input via sensor board initiates alarm record operation.
1 4
# 1
Record
Alarm input
[REC CHANNEL]
CH1 •\•\FAST
CH3 •\•\NORM
CH5 •\•\NORM
CH7 •\•\SKIP
CH9 •\•\SKIP
CH11 •\•\SKIP
CH13 •\•\SKIP
CH15 •\•\SKIP
SET
55
1 4
# 2
Record
Alarm input
CH2 •\•\NORM
CH4 •\•\NORM
CH6 •\•\FAST
CH8 •\•\SKIP
CH10 •\•\SKIP
CH12 •\•\SKIP
CH14 •\•\SKIP
CH16 •\•\SKIP
EXIT
1
No
# 3
Record
Record