Table of Contents
Advertisement
Where:
‡@ PASSWORD
Sets a four-digit password to be used to access MENU mode. Use CAMERA SELECT number
buttons 1 •| 9 to enter password.
‡A PASSWORD LOCK
Sets if password required to access MENU mode and change operational settings.
OFF
ON
‡B KEY PROTECT
Sets which front panel buttons are locked out (disabled) from use.
OFF
CONTROL
ALL
‡C COVERT
Sets whether camera channels set to ON at ‡D appear at the display monitor or not. (Camera
hidden from observation during live or playback, full or split view.)
OFF
ON
(Continued following page.)
No password required. (Factory setting.)
Password required. See sec. '6. MAIN Menu Settings'.
Do not forget your password. If password is forgotten,
resetting to defaults will clear password setting and allow
you to access MENU mode.
Note that resetting to defaults will also clear all settings
currently made. See sec. '4-2. Resetting to Factory
Defaults' to reset defaults.
All front panel buttons can be used. (Factory setting).
Control group buttons only (shown below) locked out.
FUNC
Only MENU button can be used. All other buttons locked out.
All cameras displayed at monitor as normal. (Factory setting.)
Black displayed at monitor for channels set to ON at ‡D in this menu.
Covert channels will be monitor displayed when alarm is
input and ALARM DISPLAY in ALARM / LOSS menu is
ON. See sec. '6-9. Alarms'.
To view covert channels live or playback recorded
material, covert setting must be set to OFF.
Important
CONTROL
STOP
PLAY
JOG/SHTL
ENTER
Important
45
Advertisement
Table of Contents
