Assign Hdd Use - Ganz CDR-16T Operation Manual

6-10-1. Assign HDD Use

This menu allows user to specify how connected hard disks will be used. See sec. '5-1.
Accessing MAIN Menu' for information on making menu selections.
‡@
Where:
‡@ ID (SCSI ID)
Used to access [ASSIGN HDD USE] sub menu. Sub menu can be accessed if ID # has an
asterisk next to it. Cursor select asterisk marked ID # and push ENTER to access sub menu
for related drive. Select setting in sub menu and push ENTER again to return to this menu.
Sub menu can only be accessed for hard disk drives having status codes of NOT ASSIGNED,
PB USE ONLY or PB/REC USE.
Hard disks cannot be accessed regardless of status codes shown if:
Disk is currently being recorded to.
Disk is next disk to be recorded to. (When current disk is at the final 5% of its capacity.)
Disk is currently in playback operation (play, jog or shuttle).
(Continued following page.)
[ASSIGN HDD USE]
‡A
ID REC TIME
#0 * 1H17M
#1 – 2H34M
#2 * 2H34M
#3 – 2H34M
#4 – – – – –
#5 – – – – –
#6 – – – – –
#7 – – – – –
TOTAL REC TIME –
‡E
To view page 2 of this menu, cursor select ID #7 and
move cursor 'down' to ID #8 (on page 2). Page 2 will be
automatically displayed. To return to page one, cursor
select ID #8 on page 2 and move cursor 'up' to ID #7 (on
page 1).
Settings ‡A – ‡E are not explained here as they are
explained in sec. '7-3. HDD Information' previous.
‡B
STATUS
NOT ASSIGNED
PB/REC USE
PB/REC USE
FORMAT 50%
NONE
NONE
NONE
NONE
5H08M
EXIT
Note
81
‡C 1/2
REC PLAY
– –
‡D
* *
– –
– –
– –
– –
– –
– –