Ganz CDR-16T Operation Manual page 74

Table of Contents

Advertisement

Ø Line 1 (1
ST
priority)
Record every weekday from 8:30 a.m. to 5:30 p.m. using program 1 record settings
(CONTINUOUS mode, normal quality and no audio).
Ø Line 2 (2
ND
priority)
Record every Monday from 10 p.m. to Tuesday at 9 a.m. using program 3 record settings
(CONTINUOUS mode, normal quality and audio).
Ø Line 3 (3
RD
priority)
Record 24 hours every day using program 2 record settings (PRE ALARM mode, high quality
and audio. Note that since PRE ALARM is dependent on alarm input no percentage is listed in
HDD parameter field. Likewise for ONE SHOT mode.).
u
In the Case of the Program Set Above:
Recording starts from Monday at 8:30 a.m. (1
At 5:30 p.m. record operation changes to line 3 settings (3
At 10 p.m. record operation changes to line 2 settings (2
line 3 is set until Tuesday at 9 a.m., but 1
record operation changes to line 1 settings at 8:30 a.m.
u
Special Button Functions:
Button
ENTER
ST
REC PROGRAM
Goes
selected
ENTER again to return to this menu)
ST
priority) using line 1 settings until 5:30 p.m.
RD
priority) using program 2.
nd
priority) using program 3. In this case,
priority line 1 setting starts at 8:30 a.m. As a result,
Description
to
information
68
menu
(push

Advertisement

Table of Contents
loading

Table of Contents