Ganz CDR-16T Operation Manual page 81

Table of Contents

Advertisement

‡O DISPLAY POSITION
This setting accesses the sub menu below and sets where superimposed information appears
(date / time, title, etc.).
03/10/2001 07:12:30 (SAT)
(•¦ Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
ERR display (shown in sec. '4-3-1. Full Screen') cannot
be set ON / OFF in DISPLAY MODE menu and cannot be
repositioned in this menu. ERR display is automatically
set ON / OFF when display superimpose is set ON / OFF
in FUNCTION menu.
u
To Change Position:
a) Cursor select item to reposition.
b) Use buttons and dial (see table below) to reposition item.
c) Repeat steps a and b for all items you want to reposition.
d) Push ENTER to save settings and return to DISPLAY MODE menu.
u
Special Button Functions:
Button
+ Dial
+ Dial
Dial
ENTER
[TITLE POSITION]
Important
Selects display item to reposition
Moves position down one step each push
Moves position down at high speed with dial
Moves position up one step each push
Moves position up at high speed with dial
Moves position left or right
DISPLAY POSITION
sub menu
REC
NO1: CONT
TL:0.02S
#00
Description
Saves settings and returns user to
DISPLAY MODE menu
75
NOR
0H00M00S
ALSVRM

Advertisement

Table of Contents
loading

Table of Contents