Pre-Configuring The Printer; Connecting A Wi-Fi Device To The Printer - NCR RealPOS 7197 Wi-Fi Configuration Manual

6

Pre-Configuring the Printer

Use the procedures in this section when you want to configure the printer at a remote
location (lab) and then connect the printer to the POS network later.
You need a Wi-Fi device and the following network information in advance.
• POS Network ID (SSID)
• Security Type
• Security Password
• Access to Security Certificates (if applicable)

Connecting a Wi-Fi Device to the Printer

1. Connect the printer to power.
2. Print a diagnostic page by simultaneously pressing the Paper Feed Button and
3. Note the printer serial number located on the top of the diagnostic page.
closing the receipt cover.
Configuring a Wi-Fi Printer