Table of Contents
Advertisement
1-12
Viewing Actual Printer Settings
To view the actual settings of the connected printer, follow these steps:
1. Connect the printer to the terminal. For more information, refer to
2. Select Get.
Configuring the Printer
To configure the printer, follow these steps:
1. Connect the printer to the terminal. For more information, refer to
2. Load the actual printer settings to the application. For more information, refer to
3. Modify the printer settings through the Configuration Utility application.
4. To apply the new settings to the connected printer, select Set.
Printing a Diagnostic Form
To print a diagnostic form using the Configuration Utility, follow these steps:
1. Connect the printer to the terminal. For more information, refer to
2. Select Print Diagnostic Form.
Note: Ensure that the connected printer is loaded with a thermal receipt paper.
printer to the terminal
on page 9.
The application gets the actual settings of the connected printer and displays the
values on the application tabs.
printer to the terminal
on page 9.
Viewing Actual Printer Settings
Note: For more information on printer settings, refer to your printer's
documentations.
• For 7169, refer to NCR 7169 Multifunction Printer Owner's Manual (BCC5-0000-
5349) or to NCR 7169 Multifunction Printer Programmer's Guide (BCC5-0000-5352).
• For 7199, refer to NCR 7199 Thermal Receipt Station Printer User Guide (BCC5-0000-
5172) or to NCR RealPOS 7199 Thermal Receipt Station Printer Programmer's Guide
(BCC5-0000-5170).
The application sends all printer setting changes on all tabs to the connected printer
and reboots the printer. After the application has successfully configured the new
settings, it displays a notification.
printer to the terminal
on page 9.
The application sends the Print Configuration Form command to the connected
printer and prints the current printer configuration on a receipt.
above.
Introduction
Connecting the
Connecting the
Connecting the
Hide quick links:
Advertisement
Table of Contents
