Transmitting The Registered Dtmf Code; Transmitting The Dtmf Code Manually - Yaesu FTM-100DR Operating Manual

Using the DTMF function
8
Press and hold
Sets the DTMF code and returns the display to the previously viewed screen.
Tip You can also return to the previous screen by pressing

Transmitting the registered DTMF code

1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [3 AUTO DIALER], then
press
.
The AUTO DIALER screen appears.
4
Rotate the DIAL to select "1 ON" .
Rotating the DIAL changes the function between "1
ON" and "2 OFF".
5
Press and hold
Returns the display to the previously viewed screen and displays
side of the screen.
Tip You can also return to the previous screen by pressing
6
While pressing and holding [PTT] on the microphone, use the number keys on the
microphone to input the channel number to which the DTMF code is registered.
The DTMF code sequence is automatically transmitted.
7
Release [PTT].
While transmitting the DTMF code, transmission status is sustained even when
[PTT] is pressed.

Transmitting the DTMF code manually

1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [3 AUTO DIALER], then
press
.
The AUTO DIALER screen appears.
92
for over one second.
for over one second.
for over one second.
for over one second.
3 times.
on the top right
3 times.