Setup Menu Operations: 4 Signaling; Setting The Tone Frequency (1 Tone Sql Freq); Setting The Dcs Code (2 Dcs Code); Setting The Dtmf Code Transmission Method (3 Auto Dialer) - Yaesu FTM-100DR Operating Manual

Setup menu operations: 4 SIGNALING

Setting the tone frequency (1 TONE SQL FREQ)

The tone frequency may be changed.
For details, see "Selecting the tone frequency" on page 81.

Setting the DCS code (2 DCS CODE)

You can set the DCS code.
For details, see "Selecting the DCS code" on page 84.

Setting the DTMF code transmission method (3 AUTO DIALER)

You can set method (Auto or Manual) to transmit the registered DTMF code.
For details, see "Transmitting the registered DTMF code" on page 92.

Setting the squelch type (4 SQL TYPE)

Select the squelch type.
For details, see "Communicating with specific stations" on page 81.

Registering the DTMF code (5 DTMF MEMORY)

The maximum of 16-digit DTMF codes can be registered for telephone numbers to
make a call through the public telephone line from a phone patch.
For details, see "Registering the DTMF code" on page 91.

Calling only the specific stations (6 PAGER CODE)

Using the new pager code permits calls to specific stations only.
For details, see "Using the new pager function" on page 86.

Notification of calls from partner stations (8 BELL RINGER)

The beep may be set to alert you of a call from partner stations.
For details, see "Notification of incoming calls from partner stations using the bell
function" on page 89.
131