Setting The Time Zone; Setting The Automatic Repeater Shift - Yaesu FTM-400DR Operating Manual

Setting the Time Zone

The internal clock can be set to time data from GPS (Coordinated Universal Time). On
Factory Settings the internal clock is set to Japan Time (UTC+9:00 TOKYO) and does
not need to be adjusted.
The time zone can be adjusted in 0.5 hour units for up to ±13 hours.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [CONFIG].
3
Tap [3 TIME ZONE].
The time zone appears in orange.
4
Turn the O to adjust the time zone.
Rotate the O and select the desired time zone for a
oversea city.
The time zone can be adjusted in 0.5 hour units for up
to ±13 hours.
5
Press O shortly.
The time zone is set and displayed in green.
6
Press and hold M over 1 second.
Returns to the previous screen.
Reference • Factory Setting: UTC+9:00 TOKYO

Setting the Automatic Repeater Shift

When using the repeater for communication, the automatic repeater shift function that
automatically starts communication via the repeater can be set to ON/OFF.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [CONFIG].
3
Tap [4 AUTO RPT SHIFT] and select between ON/
OFF.
Tapping [4 AUTO RPT SHIFT] switches between [ON]
and [OFF].
ON: Automatically starts communication using
repeater shift.
OFF: Manually select tone frequency and start
communication
4
Press and hold M over 1 second.
The automatic repeater shift is set and the screen returns to the previous one.
Reference • Factory Setting: ON
FCC ID: K6620345X40
IC: 511B-20345X40
Setup Menu
65