Setting The Repeater Shift Direction (5 Repeater Shift); Setting The Repeater Shift Width (6 Repeater Shift Freq) - Yaesu FTM-100DR Operating Manual

Setting the repeater shift direction (5 REPEATER SHIFT)

You can set the repeater shift direction.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [8 CONFIG], then press
.
3
Rotate the DIAL to select [5 REPEATER SHIFT],
then press
4
Rotate the DIAL to select the shift direction.
1 SIMPLEX: Does not shift.
2 − REPEATER: Shifts in the lower frequency
3 + REPEATER: Shifts in the higher frequency
Tip The default setting: Differs depending on frequency
5
Press and hold
Sets the repeater shift direction and returns the display to the previously viewed
screen.

Setting the repeater shift width (6 REPEATER SHIFT FREQ)

You can set the repeater shift width.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [8 CONFIG], then press
.
3
Rotate the DIAL to select [6 REPEATER SHIFT
FREQ], then press
4
Rotate the DIAL to select the desired shift width.
The shift width can be set at 0.05MHz increments
from 0.000MHz to 99.950MHz.
Tip The default setting: Differs depending on frequency
5
Press and hold
Sets the repeater shift width and returns the display to the previously viewed screen.
for over one second.
.
direction.
direction.
for over one second.
for over one second.
.
for over one second.
Setup menu operations: 8 CONFIG
137