Tx/Busy Indicator Customization - Yaesu FTA-720 Operating Manual

TX/BUSY Indicator Customization

Default TX/BUSY illumination colors have been as-
signed at the factory. These may be changed by the user,
if you wish to utilize another custom-designed color
hue. The Red, Green, and Blue elements of each color's
composition may be adjusted individually!
 Press the key, then press the
vate the Menu ("SET") mode.
 Rotate the DIAL selector knob to select Menu Item
"1. Display," then press the
 Rotate the DIAL selector knob to select Sub Menu
Item "8. RX LED" when you wish to change the
BUSY indicator's color, or Sub Menu Item "9. TX
LED" when you wish to change the TX indicator's
color, then press the
 Press the key again to enable adjustment of the
selected Menu item.
 Rotate the DIAL selector knob to adjust the "R"
(red) element of the color; you will be able to see
the effects of your changes. The degree of color hue
is designated in a numerical scale of "000" through
"255," and you may adjust the display's red com-
ponent until it is just the way you want it. As you
make the adjustment, you will be able to see the ef-
fects of your changes.
42
m
Iscellaneous
key to acti-
key.
key.
s
ettIngs
 Press the key again, then rotate the DIAL se-
lector knob to adjust the "G" (green) element of the
color.
 Repeat the process described above to adjust the "B"
(blue) element of the color.
 Press the key to save the new setting, then
press the PTT key repetitively until the radio exits
to normal operation.
Note: You may also change the indicator's color of the
Emergency lamp, Weather Alert lamp, and Over-Heating
lamp by the Menu Items. See page 49 for details.
FTA-720 O M
perATing AnuAl