Adding An Ipv6 Acl - HP 1920 Gigabit Ethernet Switch Series User Manual

Item
MAC
Address
Filter
COS(802.1p priority)
Type Filter
Time Range

Adding an IPv6 ACL

1. Select QoS > ACL IPv6 from the navigation tree.
2. Click the Add tab.
The IPv6 ACL configuration page appears.
Figure 450 Adding an IPv6 ACL
3. Add an IPv6 ACL.
4. Click Apply.
Description
Source MAC
Select the Source MAC Address box and enter a source MAC address and
Address
a mask.
Source Mask
Destination MAC
Select the Destination MAC Address box and enter a destination MAC
Address
address and a mask.
Destination Mask
Specify the 802.1p priority for the rule.
Select the LSAP Type box and specify the DSAP and SSAP fields in the LLC
LSAP Type
encapsulation by configuring the following items:
•
LSAP Mask
•
Protocol Type Select the Protocol Type box and specify the link layer protocol type by
configuring the following items:
•
Protocol Mask
•
Select the time range during which the rule takes effect.
LSAP Type—Frame encapsulation format.
LSAP Mask—LSAP mask.
Protocol Type—Frame type. It corresponds to the type-code field of
Ethernet_II and Ethernet_SNAP frames.
Protocol Mask—Protocol mask.
461