Configuring Authorization Methods For An Isp Domain - HP 5920 Series Configuration Manual

Step
4. Specify the authentication
method for LAN users.
5. Specify the authentication
method for login users.
6. Specify the user role
switching authentication
method.

Configuring authorization methods for an ISP domain

Configuration prerequisites
Before configuring authorization methods, complete the following tasks:
For HWTACACS authorization, configure the HWTACACS scheme to be referenced.
1.
Determine the access type or service type to be configured. With AAA, you can configure an
2.
authorization scheme for each access type and service type.
Determine whether to configure the default authorization method for all access types or service
3.
types. The default authorization method applies to all access users, but has a lower priority than
the specific authorization method configured for an access type or service type.
Configuration guidelines
When configuring authorization methods, follow these guidelines:
The device supports HWTACACS authorization but not LDAP authorization.
•
To configure RADIUS authorization, also configure RADIUS authentication, and reference the same
•
RADIUS scheme for RADIUS authentication and authorization. If the RADIUS authorization
configuration is invalid or RADIUS authorization fails, the RADIUS authentication also fails. If
RADIUS authorization fails, the server sends an error message to the NAS, indicating that the server
itself is not responding.
Configuration procedure
To configure authorization methods for an ISP domain:
Step
1. Enter system view.
2. Enter ISP domain view.
Command
authentication lan-access { local [ none ] | none
| radius-scheme radius-scheme-name [ local ]
[ none ] }
authentication login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ]
ldap-scheme ldap-scheme-name [ local ]
[ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
authentication super { hwtacacs-scheme
hwtacacs-scheme-name | radius-scheme
radius-scheme-name } *
Command
system-view
domain isp-name
41
Remarks
By default, the default
authentication method is
used for LAN users.
By default, the default
authentication method is
used for login users.
By default, the default
authentication method is
used for user role
switching authentication.
Remarks
N/A
N/A