Configuring An Snmp User - HP V1910 User Manual

Create an SNMP group
c.
Configuration items for creating an SNMP group
2.
Item
Group Name
Security Level
Read View
Write View
Notify View
ACL
Return to SNMPv3 configuration task

Configuring an SNMP user

Table 35 Select Device  SNMP from the navigation tree.
Table 36 Click the User tab to enter the page as shown in b.
Click Add to enter the Add SNMP User page, as shown in c.
Table 37
Description
Set the SNMP group name.
Select the security level for the SNMP group. The available security levels are:

NoAuth/NoPriv—No authentication no privacy.

Auth/NoPriv—Authentication without privacy.

Auth/Priv—Authentication and privacy.
IMPORTANT:
For an existing SNMP group, its security level cannot be modified.
Select the read view of the SNMP group.
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write operations to all MIB
objects on the device.
Select the notify view of the SNMP group, that is, the view that can send trap
messages.
If no notify view is configured, the agent does not send traps to the NMS.
Associate a basic ACL with the group to restrict the source IP address of SNMP
packets, that is, you can configure to allow or prohibit SNMP packets with a specific
source IP address, so as to restrict the intercommunication between the NMS and the
agent.
list.
123