Zooming Traces - Teledyne HDO9000 Operator's Manual

Zooming Traces

The Zoom function magnifies a selected region of a trace. Depending on your oscilloscope model,
you can display up to eight zooms of any channel, math, or memory trace.
Zooms may be created
adjust zooms the same as any other trace using the front panel Vertical and Horizontal knobs or the
touch screen zoom factor
The current settings for each zoom trace can be seen on the
convenient panel for turning on/off zooms or changing the zoom source.
The MultiZoom feature creates time-locked zoom traces for only the waveforms that you choose to
include. The zooms are of the same X-axis section of each waveform. As you scroll through a
waveform, all included zooms scroll in unison. For more information, refer to MultiZoom.
Zoom Dialog
Zoom controls appear throughout the X-Stream software wherever it is likely you may wish to change
the display scale of a trace, sometimes as a main dialog, sometimes as a subdialog, such as when
setting up:
Math traces on
l
Memory traces on
l
To display the zoom controls, choose Math > Zoom Setup from the menu bar, or touch a zoom
descriptor box.
The main Zoom dialog contains selection boxes for turning on/off and changing the source of a zoom.
There are also options to:
Reset All, return all zooms to x1 magnification.
l
Quick Zoom, create a corresponding zoom trace for each open channel trace, same as using
l
the front panel Zoom button.
MultiZoom
l
in several ways, using either the front panel or the touch screen. You can
controls.
Fx dialogs
Mx dialogs
Zx dialogs, while the
Using MAUI
Zoom dialog is a
31